• Insulated Roof Systems
• Insulated Wall Systems
• KS1000 AWP
• KS1150 TF/ KS1150 TC
• KS1150 FR
• KS1150 FA
• KS1000 FH
• KS1000 RW
• OPTIMO
• Controlled Environment
• Ancillary Products

OPTIMO

Applications

Kingspan 600/900/1000 Optimo Wall and Facade Systems are secret fixed and can be laid horizontally or vertically. Suitable for all building applications except where there are low temperature internal conditions.

Dimension and Weight

External Facing Profiles        Internal Facing Profiles      Panel thickness (mm) 60 80 100 120 150 Weight (kg/m2) - 1000 steel 0.7/0.5 mm 12.91 13.71 14.51 15.31 16.51 Weight (kg/m2) - 900 steel 0.7/0.5 mm 11.62 12.34 13.06 13.78 14.86 Weight (kg/m2) - 600 steel 0.7/0.5 mm 7.74 8.22 8.70 9.18 9.90 FLATNESS TOLERANCES L (mm) 200 400 700 1000 F (mm) 0,6 1,0 1,5 1,8 Note: Measurements not to be taken within 100mm of joint ie. The joint is excluded. Bow is also excluded.       Flatness tolerance based upon EN 14509 draft European Standard for Self-supporting double-skin insulated sandwich panels-Factory made products-Specification.   AVAILABLE LENGTHS Module lengths 2.0 to 6.0 metres. Modules less than 1.8 metres long can be supplied and are subject to an extra charge. The modules cannot be end lapped.

Materials

STEEL Hot-dip zinc coated steel with a total of 275g/m2 of zinc, according to EN 10147:2000. Substrate thicknesses Standard external sheet thickness 0.70 mm. Standard internal sheet thickness 0.50 mm. External Coating SpectrumTM Kingspan SpectrumTM is a 60μm Polyurethane coated semi gloss finish with a slight granular effect. It offers an outstanding durability- and weather resistance performance, excellent corrosion and UV‑resistance as well as high color & gloss retention characterstics. Its superior flexibility enables high resistance against mechanical damages. Kingspan Spectrum is available in a wide range of solid and metallic colours. Furthermore it is free of clorine, phtalates and plasticizers and 100% recyclable. Internal Coating Polyester Polyester coating with a nominal thickness of 15 µm. INSULATION CORE Firesafe IPN closed-cell foam is the standard insulating core used. It is made to a non-deleterious specification with Zero Ozone Depletion Potential ODP and is CFC / HCFC free.

Perfomance

Thermal Insulation Panel Thickness U value (W/m2K) (mm) HCFC Free = 0.022 60 0.33 80 0.30 100 0.23 Biological Kingspan insulated sandwich panels are immune to attack from mould, fungi, mildew and vermin. No urea formaldehyde is used in the construction, and the panels are non-deleterious. Fire Kingspan Optimo have been tested and approved and comply with National Building Regulations and Norms. Panel Thickness (mm) Fire rating 60 For detailed information please 80 contact the local Technical Dpt. 100   Acoustics All Kingspan Optimo have a single figure weighted sound reduction Rw= 25 dB.

Packing and Delivery

Standard packing – road transportation Kingspan Optimo are stacked weather side to internal side. The top, bottom, sides and ends are protected with foam and timber packing and the entire palette is wrapped in plastic. The number of panels in each pack depends on panel thickness and length. The table below is shown as a guide. Quantities are reduced for exceptionally long panels. Typical palette height is 1,100 mm. Maximum palette weight is 3,500 kg. Panel core thickness (mm) 60 80 100 Number of panels in package 17 13 10 Delivery All deliveries (unless indicated otherwise) are by road transport to project site. Off loading is the responsibility of the client.